With October’s Wardrobe Challenge including zippers, I thought now would be a good time to share a few easy ways to embellish with exposed zippers.

exposed zipe

A fun way to change the look of a pair of jeans is to embellish the leg with an exposed zipper.  Follow along:

angelawolfexposedzip1Supplies Needed:

angelawolfexposedzip2

Step 1: On the wrong side of the fabric, mark the center of the pant leg (could be front or back, wherever you want the zipper).

If marking an existing pair of jeans, rip out the hem at least 5″ from each side of new mark. Press the fusible interfacing along the newly marked center line.

angelawolfexposedzip3

Step 2: Mark the hem, hem allowance, and the length of the zipper opening down center of the pant leg.

angelawolfexposedzip4

Step 3: Determine the width of the zipper opening (depends on the width of the zipper teeth).  Draw in opening, top edge, and then add a triangle from the center cut line to each corner (as shown above).

angelawolfexposedzip5Step 4: Cut along center marking.  Cut each triangle point (if you are worried about the fabric fraying, add Fray Check to the top corners)

angelawolfexposedzip6

Step 5: Press the seam allowances back and press triangle tip up.

angelawolfexposedzip8

Step 6: Line up the zipper with the metal teeth in the center of the opening.  Check the placement of the zipper stop and zipper tab.

angelawolfexposedzip10angelawolfexposedzip9

 

 

 

 

 

 

 

 

 

 

 

 

 

angelawolfexposedzip11

Step 7: Fold back the zipper tape and press in place at the hemline.

angelawolfexposedzip13

angelawolfexposedzip12

Step 8:  Pin zipper in place.

angelawolfexposedzip14

angelawolfexposedzip15

Step 9:  In this example, I am using standard polyester thread, cotton or silk thread would work too.  Set the sewing machine to a triple stitch and lengthen the stitch length to 4.0.  (Note:  if you don’t have this feature, use denim thread, straight stitch, stitch length 4.0)

angelawolfexposedzip16

Step 10: Stitch along the edge of the zipper.  Open and close the zipper as needed in order to get the foot by the zipper tab.  angelawolfexposedzip17Step 11:  Notice how I have lined up the edge of the zipper foot with the metal teeth, a very easy to get a straight stitch  … or this would be a great time to utilize the laser vision guide feature on your machine! 🙂

angelawolfexposedzip18

Step 12: Press up the hem with the tailor’s clapper for a crisp crease.  By the way, did I mention WAWAK Sewing is now carrying my tailor’s clapper!  Yeah!

angelawolfexposedzip19

Step 13: Hem the jeans and move onto the other leg.

That’s it! Now this is just one quick, easy way to install a hidden zipper.  I will give you some more ideas next time.

Cheers,

Angela Wolf

 

WAWAK_SEWING  Angela_Wolf_DVD_Cover__70546_1405390138_1280_1280

Pin It on Pinterest

Share This

Share this post with your friends!